Symbol Technologies QRG PDT 8100 User Manual
Page 33
31
Q
u
i
c
k
R
e
f
e
r
e
n
c
e
Lower- case and
upper-case let-
ters, and numbers
written on the
wrong parts of the
LCD screen.
Ensure you are writing letters and
numbers in the appropriate section
of the writing area.
Tapping the
screen buttons or
icons does not
activate the cor-
responding fea-
ture.
LCD screen not
aligned correctly.
Align the screen. Choose Screen/
Align Screen from the System tab
under Start/Settings, or hold down
the Function button and press the
Action button.
The system is
hung.
Soft reset the system. To perform a
soft reset, see
A message ap-
pears stating that
your terminal
memory is full.
Too many files
stored on the ter-
minal.
Delete unused memos and
records. You can save these
records on your computer.
Too many applica-
tions installed on
the terminal.
If you have installed additional ap-
plications on your terminal, remove
them to recover memory. Select
Start, then Settings, and select
the System tab. Tap Remove Pro-
grams, select the unused program
and tap Remove.
Beamed data
does not trans-
mit.
Terminals too
close together.
Confirm that the terminals are 5”
apart, and there is a clear path be-
tween the two devices.
Insufficient room
lighting.
Adjust the room lighting or move to
a different location.
Problem
Cause
Solution
6598801a.fm Page 31 Monday, December 8, 2003 2:01 PM