Source Technologies 1352 MICR 40 User Manual

Page 59

Secure MICR Printer User’s Guide



Source Technologies

July 2003

PJL Re-Lock Sequence With A New Password Value

%-12345X@PJL DEFAULT LRESOURCE:”flash:” LRWLOCK=”xxxxxxxx”(0D)(0A)

%-12345X

This command requires the resources to be previously unlocked. The new password is
represented by the value xxxxxxxx. Th UEL is again optional but recommended.

After consulting Lexmark Technical Reference materials you may wish to expand the PJL
sequences to include more than the examples above. To chain multiple PJL commands follow
the following format:

(UEL)(PJL COMMAND)(0A)(PJL COMMAND)(0A)(PJL COMMAND)(0A)(UEL or ENTER

LANGUAGE)

The normal printer action to any format problems or missing or extra symbols is to ignore the
PJL command. This does make troubleshooting format errors difficult. Have patience!

Note: Density and EconoMode PJL commands are ignored by the ST-9116.

PCL Font Call Commands

After PJL has unlocked the MICR FLASH resources, the ST-9116 uses standard PCL5e
commands to print. The five resident Source Technologies MICR font resources are all
bitmapped fonts and therefore cannot be scaled larger or smaller than the bitmapped images.
These fonts can be called by either a PCL Font Selection String or by their ID. The commands
are:

E13B MICR FONT (10O(s0p8h8v0s7b360T The Selection String

(30802X

The ID Call

SECURE NUMERIC

(16C(s0p5h36.24v0s112T The Selection String

(30043X

The ID Call

ICR SECURE

(1O(s1p12v0s0b110T

The Selection String

(30066X

The ID Call

MICROPRINT

(2Q(s1p0.96v0s0b1023T The Selection String

(30055X

The ID Call

CMC7 MICR FONT

14Y(s0p8h8v0s0b361T

The Selection String

(30803X

The ID Call