Source Technologies 1352 MICR 40 User Manual

Page 47

Text mode
Original mode

Secure MICR Printer User’s Guide

Source Technologies

July 2003

Page 43

&%1B(3@

PCL command to return to the default font.

&%1B$&f0S

PCL command to push (store) the current cursor position.

&%1B$*p296x3184Y

PCL command to move the cursor to 296X, 3184Y. At 300
dpi, this is .97 inches across and 10.61 inches down. We
are precisely positioning the MICR line.

&%SMD...$

Print E-13B MICR command. Prints the MICR line and
stores the MICR line information in the second position in
the Audit Report.

&%1B$&f1S

PCL command to pop (return) the cursor to the pushed
position.

&%SQ710:33:45 AM$

Here we send the time of print to the printer. The data is
recorded in the Audit Report but this field is not printed on the
page.

&%STORE$

Signals the end of a check and the end of Audit Report
recording.

&%??!!

Turns Hex Transfer off.

Section 8: Audit Trail Reports