Sennheiser 2015 - Manual (Page 37)

89
Storing a setting
̈
Press the SET button to store the setting. “STORED” appears on the dis-
play, indicating that the setting has been stored. The display then
returns to the top menu level.
With most menus, new settings become effective immediately
without having to be stored. An exception are the “
RESET ” menus
of both transmitter and receiver and the “ TUNE ” menu of the trans-
mitter. With these menus, new settings only become effective after
they have been stored.
Exiting the configuration menu
When in the configuration menu, briefly pressing the ON / OFF button will
cancel your entry (ESC function) and return you to the “SETUP” display
without storing the setting.
Overview of menus
Display Receiver Transmitter
SETUP Standard display in the configuration
menu Standard display in the configuration
menu
INT.MIC Switching the internal microphone
on/off –
FADE Adjusting the gain reduction of the
automatic priority circuit –
SQELCH Adjusting the squelch threshold –
ACCESS Releasing channels for the user Releasing channels for the user
TUNE Setting a frequency for a selected
channel in the channel bank “U” (user
bank) Setting a frequency for a selected
channel in the channel bank “U” (user
bank)
NAME Entering a name Entering a name
RESET Resetting the unit to the factory-
preset default settings Resetting the unit to the factory-
preset default settings