Sennheiser 2015 - Manual (Page 36)

88
Getting into the configuration menu
Note:
In order to get into the configuration menu, the transmitter or receiver
must be switched off.
̈
Press the SET button ᕧ and keep it pressed.
̈ Press the ON / OFF button ¹ and keep it pressed for approx. five
seconds. “SETUP” appears on the display.
̈
Press the SET button ᕧ to get into the configuration menu.
Selecting a menu
̈ Press the ̆ / ̄ rocker button (UP/DOWN) to select a menu.
̈
Press the SET button to get into the setting mode of the selected menu.
The current setting that can be adjusted flashes on the display.
Adjusting a setting
̈
Press the
̆
/
̄
rocker button (UP/DOWN) to adjust the setting.
By briefly pressing the ̆ / ̄ rocker button, the display jumps either
forwards or backwards to the next setting. In the “ FADE ”, “ TUNE “,
“ NAME “ and “ ACCESS ” menu, the ̆ / ̄ rocker button features a
“fast search” function: If you hold down the
̆
or
̄
button, the
display cycles continuously, allowing you to get fast and easily to
your desired setting. The new setting flashes on the display until it
is stored.
¶
¹