Samsung SF-370 Series - Manual (Page 12)

S
ETUP
AN
D
C
OP
YIN
G
1.5
S
ETUP
AN
D
C
OPYING
S
ETUP
AND
C
OPYING
S
ETUP
AND
C
OPYING
S
ETUP
AN
D
C
OPYING
S
ETUP
AN
D
C
OP
YI
NG
S
ETUP
AND
C
OPYING
S
ETUP
AND
C
OPYING
Loading paper
To receive faxes or make copies, you should load the paper in the ASF
3
. You can load approximately 50 sheets
of paper. Before loading the paper, see if the paper size is set correctly in the System Setup.
For more information, see "Paper Size" on page 6.10.
1 Put in the Paper Support.
2 Pull the Dust Cover toward you.
3 Fan the papers and insert them into the ASF
with the print side face up.
4 Squeeze the Paper Guide, and move it to the
right to match the width of the paper.
5 When completed, replace the Dust Cover to
its original position.
Paper type and sizes
Satisfactory print and receive quality can be obtained with many types of plain paper. Since the quality of plain
paper varies widely, test the print quality before buying large quantities of paper. Your machine uses a variety of
papers including:
• Xerographic paper
• Bond paper
• Dual-purpose paper
Because all paper varies in physical characteristics, you can receive mixed results from different packages of
paper even though the packages contain the same type of paper. If you encounter undesirable results, try the
other side of the paper, a different type, or another package of the same kind of paper.
DO NOT use the following types of paper with your machine:
• Continuous form feed paper
• Synthetic paper
• Thermal paper
• Multi-sheet forms and documents
• Chemically treated paper
• Papers with raised, embossed lettering
The following print media can be used with your machine:
3. Automatic Sheet Feeder.
Paper size Dimensions Paper weight
A4 210 mm x 297 mm
60 ~ 90 g/m
2 Letter 216 mm x 279 mm
Legal 216 mm x 356 mm
Paper Guide
Paper Support
Dust Cover