Samsung 173MW - Manual (Page 26)

Installing a VESA base
The monitor supports VESA mounting standard for use with various VESA mounting devices.
This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad.
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
3. Align the four bolt holes (1) on the back of monitor with the holes(2) on the VESA base and then
fasten the base with the four bolts (3) supplied.
Caution :The stand is made of aluminum. Keep it from getting nicked or scratched.
Only the supplied bolts should be used.
Samsung Electronics will not be responsible for damages caused by using a base other than those
specified.