Sony RDR-GX7 - Manual (Page 82)

82
Options Settings
Options Settings
The Options Setup allows you to set up other operational
settings.
Select “Options” in the Setup Display. To use the display, see
“Using the Setup Displays” (page 74).
The default settings are underlined.
Format Disc (DVD-RW only)
Selects the recording format when formatting a DVD-RW.
Bilingual Recording (for all recordable discs
except DVD-RW in VR mode)
Selects the sound to be recorded on the disc. This setting is not
necessary when recording on DVD-RWs (VR mode) that record
both the main and sub sounds.
Dimmer
Adjusts the lighting of the front panel display.
Auto Display
Command Mode
Changes the Command Mode of the recorder if other DVD
equipment is assigned the same Command Mode. Be sure to
match the Command Mode switch on the remote to the setting
made here. For details, see “Preparing the Remote” in the
separate booklet, “Hookups and Setting.”
Factory Setup
Allows you to select the setup settings by group, and return them
to the default settings. Note that all of your previous settings will
be lost.
1
Follow steps 1 to 3 of “Using the Setup Displays”
(page 74) to select “Options” in the Setup Display.
2
Press M/m to select “Factory Setup,” then press
, or ENTER.
The display for selecting the group of settings
appears.
3
Press M/m to select the group of settings you want
to return to default from “Settings,” “Video,”
“Audio,” “Features,” “Options” “Parental
Control,” and “All,” then press
, or ENTER.
The dialogue box appears.
4
Press </, to select “Start,” then press ENTER.
The selected settings return to the default settings.
5
Press ENTER when “Finish” appears.
VR Automatically formats the disc in VR
mode.
Video Automatically formats the disc in
Video mode.
Selectable Allows you to select the format before
formatting.
Main Records the main sound for the bilingual
programme.
Sub Records the sub sound for the bilingual
programme.
Bright Bright lighting.
Dark Low lighting.
Off Turns off the lighting.
On Automatically displays information on the
screen when the recorder is turned on, etc.
Off Displays information only when DISPLAY is
pressed.
DVD1 Select this when the default Command Mode
conflicts with other DVD equipment.
DVD2 Select this when the default Command Mode
conflicts with other DVD equipment.
DVD3 The default Command Mode of the recorder.