Sony RDR-GX7 - Manual (Page 27)

27
Timer Recording
Rec
o
rding/Timer Rec
o
rding
Notes
• The beginning of some recordings may not be made when using the
PDC/VPS function.
• Select “PDC/VPS Scan Off” when dubbing or editing a DV/Digital8
format tape. When finished, select “PDC/VPS Scan On” so that the
timer recordings will be made.
To display the timer programming menu
automatically with one button (One Touch
Timer) (for SCART connections only)
If you use the SMART LINK connection, you can easily display
the timer programming menu by pressing just the [TIMER]
button.
Press [TIMER] while a disc is in the recorder.
The TV and recorder turn on and the TV’s input is switched to
the recorder. The Timer programming menu appears.
Note
When you use this function, leave the TV on, or in the standby mode.
Rec Mode Adjust
If there is not enough available disc space for the recording, the
recorder automatically selects the recording mode to enable the
programme to be recorded. This function is normally set to on.
◆To cancel the function
A Press TOOL while the Timer List is displayed.
B Press M/m to select “Rec Mode Adjust,” then press
ENTER.
C Press </, to select “Off,” then press ENTER.
Note
This function only works with a timer recording and the PDC/VPS
function set to off. It does not function with Quick Timer or Synchro
Rec.
To extend the recording duration time
You can extend the recording duration while recording.
1
Press TOOL during recording.
2
Press M/m to select “Extend Rec,” then press
ENTER.
The following display appears.
3
Press M/m to select the duration time, then press
ENTER.
You can set the duration in increments of 10 minutes,
up to 60 minutes.
4
Press </M/m/, to select “OK,” then press
ENTER.
z Hint
You can also extend the recording duration time using “Extend Rec” in
the sub-menu of the Timer List.
Note
You cannot extend the recording duration time when “PDC/VPS” is set
to “On.”
If the timer settings overlap
The following display appears.
To store the setting, press
ENTER.
To cancel or change the setting, select “Cancel.” When the
Timer List menu appears, change or cancel the setting (page 28).
◆When the timer settings overlap
The programme that starts first has priority and the second
programme starts recording only after the first programme has
finished.
◆When the recordings start at the same time
The programme that is set last has priority. In this example, timer
setting B is set after A, so the first part of timer setting A will not
be recorded.
◆When the end time of one recording and the start time of
another are the same
After finishing the previous recording, the other recording may
be delayed.
Note
When “PDC/VPS” is set to “On” for one or more timer recordings, the
start times may change in the event of a broadcast delay or early start.
Extend Rec. Time
Set the timer extend function.
Sun 28.9 10:00-11:30 AAB SP
OK
Cancel
Extend Time
Off
Wed 29.10 21:00-22:00 AAB SP
Wed 29.10 20:30-21:00 DEF SP
Timer
These timer settings overlap. Do you want to save this setting?
OK Cancel
7:00 8:00 9:00 10:00
Timer setting A
Timer setting B
will be cut off
7:00 8:00 9:00 10:00
Timer setting A
Timer setting B
7:00 8:00 9:00 10:00
Timer setting A
Timer setting B
, continued