SIIG RS-232 - Manual (Page 5)

5
BT RS232 Config Tool Installation & Setup
When setting up RS-232 to Bluetooth Converter for the first
time, you have to install and run BT1.exe as BT RS232
config tool first in your computer device. The utility CD
is enclosed in the device box. Before you use RS-232 to
Bluetooth Converter, you have to pair it with another E-
BT232 device.
The RS-232 to Bluetooth Converter must be configured first
before you use it. The purpose of configuration is to pair
two devices for an exclusive connection between them,
and pairing is done by utilizing Bluetooth address and
PIN code.
• Tool Installation
Figure 5
When setting up the RS-232 to Bluetooth Converter for the
first time, you have to install the utility software of BT
RS232 config tool in your computer first which is an
executable program in Windows environment. SB-232
config tool is used to detect and setup.