Pho n e ba s ics – Sanyo Katana User Manual
Page 34
21
Pho
n
e Ba
s
ics
To answer an incoming call with the phone closed:
1.
Make sure your phone is on. (If your phone is off,
incoming calls go to Voicemail.)
2.
When your phone rings or vibrates, press and hold the
Side Volume key (
) on the left side of the phone.
(The call will be answered in speakerphone mode.)
– or –
Open the phone to use the earpiece.
Your phone notifies you of incoming calls in the following
ways:
ⅷ
The phone rings and/or vibrates.
ⅷ
The LED indicator light flashes.
ⅷ
The backlight illuminates.
ⅷ
The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. The caller’s phone
number may also be displayed, if available.
When receiving a call, the following options are also
displayed by pressing Options (right softkey). To select an
option, highlight it and press
.
ⅷ
Call Guard to answer the call when you are in roaming
mode. (See “Using Call Guard” on page 84.)
ⅷ
Answer or Answer:Speaker to answer the call.
ⅷ
Select Audio to switch the call to your desired device (if
available).
ⅷ
Answer on Hold to put the call on hold. (See “Setting
Answer on Hold” on the next page.)
Note:
If the setting for Open Flip is set to “No Action,” opening the
phone will not answer the call. (See