Sanyo Katana - Manual (Page 131)

Section 1H: Using Your Phone’s Voice Services 118
V
o
ic
e Servic
es
Using Voice-Activated Dialing
In addition to Sprint Voice Command (see page 214), you can
use a voice dial tag to automatically dial a phone number in
your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Making a Call Using Voice-Activated Dialing
ᮣ
Press and hold or .
Programming Voice Tags
To program a voice tag:
1. From standby mode, press Contacts (right softkey).
2. Select a contact and press .
3. Press Options (right softkey) > Set Voice Tag > Add.
4. After you are prompted to say the name you wish to
program, wait for the beep and then say the name into
your phone’s microphone.
5. Respond to the prompt by repeating the name after the
beep. (The display shows “Voice Tag Recorded.”)
Note: To use the Voice Dial function, you must have stored Voice
Tag entries. (See “Programming Voice Tags” below.)
Tip: You can also make a call using voice-activated dialing with
the phone closed. Press and hold the Side Volume key
(
) up or down while in standby mode, and follow the
voice prompts.
Tip: Record voice dial tags in a quiet environment and without
the aid of an accessory (for example, a headset or hands-
free car kit).