Sony STR-DA2000ES - Manual (Page 56)

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY STR-DA2000ES-DB2000\DTP\STR-
DA2000ES-GB\GB08ADD_STR-DA2000ES-U.fm]
56 GB
model name1[STR-DA2000ES]
[4-247-241-11(1)]
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz: 40 dB
4) You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p, 75
ohms
P
R
/C
R
/R-Y: 0.7 Vp-p, 75
ohms
General
Power requirements
Power consumption
Power consumption (during standby mode)
1 W
AC outlets
Dimensions 430 Ч 161 Ч 400 mm
including projecting parts and
controls
Mass (Approx.) 10 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
STR-DA2000ES:
Remote commander RM-LG112 (1)
R6 (size-AA) batteries (2)
STR-DB2000:
Remote commander RM-PP412 (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
Area code Power requirements
U, CA 120 V AC, 60 Hz
CEL, CEK 230 V AC, 50/60 Hz
SP 220-230 V AC, 50/60 Hz
Area code Power consumption
U, CEL, CEK, SP 170 W
CA 300 VA
Area code AC outlets
U, CA 2 switched, 120 W/1A MAX
SP, CEL, CEK 1 switched, 100 W MAX
For details on the area code of the component you
are using, see page 3.