Sony XR-MS5 - Manual (Page 6)

5
En
Main unit: rear
1 AM LOOP jack and FM 75
Ω
terminals
Plug in the supplied AM and FM antennas.
2 VIDEO/AUX jacks
Accept analog sound signals from external equipment.
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to the R jack, white
plug to the L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press FUNCTION
repeatedly to select the AUX (VIDEO) function.
Tip:
To change a source name in the display, hold down a
and press POWER while the power is on.
AUX
→
VIDEO
1
2
3
4
7
5
6
PARTS AND CONTROLS
3 DIGITAL OUT (OPTICAL) jack
CD digital sound signals can be output through this jack.
Use an optical cable to connect digital audio equipment.
Remove the dust cap from the DIGITAL OUT (OPTICAL)
jack. Then connect an optical cable plug to the DIGITAL
OUT (OPTICAL) jack.
4 LINE OUT jacks
Analog sound signals for all functions can be output
through these jacks. Use a cable with RCA phono plugs
to connect audio equipment.
Connect the red plug to the R jack, and the white plug to
the L jack.
Signals input through the VIDEO/AUX jacks are not
output from the LINE OUT jacks.
5 SUPER WOOFER 3 jack
Connect an optional powered sub woofer with a built-in
amplifier to this jack.
6 SPEAKERS 3 terminals
Connect the supplied speakers using the supplied
speaker cords.
7 AC power cord
Opening the front cover
1 Pull on the right top corner of the front cover.
2 Slide it back.
1
2
When closing the front cover, slide fully towards
you, and close it.
You can operate the unit while the front cover is
closed using the remote control.
If the front cover comes off, attach as illustrated
below.