Sharp CD-BA2600 - Manual (Page 28)

28
CD-BA250(U)3.fm 00/12/4
Ad
v
a
nced Fe
atur
es
- Enhancing Y
our
System
-
Enhancing Your System
The connection cord is not included. Purchase a commercially available cord as
shown below.
„ Listening to the playback sounds from
VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
„
To record on a tape
„
Headphones
z Before plugging in or unplugging the headphones, reduce the volume.
z Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
z Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
VCR, DVD, etc.
To the line
output jack
Red
Red
RCA cord
(not supplied)
White
White
1
Use a connection cord to connect the VCR, DVD, etc. to the VIDEO/
AUX jacks.
When using video equipment, connect the audio output to this unit and the video
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE ( ) button.
4
Press the / (TAPE 2 ) button.
5
Play the VCR, DVD, etc.