Sharp CD-BA2600 - Manual (Page 21)

21
CD-BA250(U)3.fm 00/12/4
Radio
- Lis
te
n
ing t
o
t
h
e
memor
iz
ed s
tation -
Listening to the memorized station
„ Memorizing a station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
Note:
The backup function protects the memorized stations for a few hours should there be
a power failure or the AC power cord disconnection.
„ To recall a memorized station
„
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
„
To erase entire preset memory
1
Perform the steps 1 - 3 in "Listening to the Radio" on page 20.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
3
Within 30 seconds, press the PRESET or PRESET
button to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before the station is
memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorized will
be erased.
Press the PRESET or PRESET button for less than
0.5 seconds to select the desired station.
Preset channel Frequency and frequency band
This can be operated by pressing the PRESET ( or ) button on the remote
control.
1
Press the PRESET or PRESET button for more
than 0.5 seconds.
z The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
z This can be operated by pressing the PRESET ( or ) button on the remote
control.
2
Press the PRESET or PRESET button again when
the desired station is located.
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Press the ON/STAND-BY button while holding down the TUNER (BAND) button
and X-BASS/DEMO button until "TUNER CL" appears.
Listening to the Radio (See page 20.)