Sharp CD-BA2600 - Manual (Page 19)

19
CD-BA250(U)2.fm 00/12/4
A
d
va
n
c
e
d
C
D
P
lay
b
a
ck
- Pr
ogr
a
mmed Pla
y
-
Programmed Play
By specifying discs from 1 to 3 and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator will be displayed.
Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the last track
of the original program.
Notes:
z Opening the disc tray automatically cancels the programmed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
z During program operation, random play is not possible.
1
While in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select the
desired disc.
Selected disc number
2
Press the PRESET or
PRESET button to se-
lect the desired track.
Selected track number
You can also select a track by pressing the / or / button on the
remote control.
3
Press the MEMORY/SET (MEM-
ORY) button to save the track
number.
Playback order
When the track is memorized, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5
Press the / ( ) button to start playback.
To clear the programmed selections:
While in the stop mode, press the CLEAR button
on the remote control.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.