Sony CMT-J3MD - Manual (Page 20)

20
2
Press TUNER/BAND to select “FM” or
“AM”.
3
Press TUNING MODE repeatedly until
“PRESET” appears.
4
Press TUNING + or – to select the
desired preset station.
Preset number and frequency (or station
name* or RDS station name**)
* The station name appears only if you have
labelled the station (see page 59).
** European model only.
When you preset only one station, “ONE
PRESET” appears in the display.
You can select the preset numbers with the
number buttons on the remote.
5
Press z MD.
The MD deck stands by for recording and the
indicator on the z MD button lights red.
6
Press MD HS.
Recording starts.
To stop recording
Press s.
Tips
• If noise is heard while recording an AM radio
programme, move the AM loop aerial to reduce the
noise or connect a ground wire to the U terminal
(see page 65).
• You can record the MD in monaural format. For
details, see “Monaural recording” on page 41.
• To record non-preset stations, select “MANUAL”
in step 3, then press TUNING + or – to tune in the
desired station.
Recording from the
radio
— Manual Recording
You can make an analogue recording of a radio
programme on an MD or a tape.
Recording on an MD
If you use a partially recorded MD, recording
starts after the recorded tracks. To erase the
recorded contents, see “Erasing recordings” on
page 45.
To turn on the system, press ?/1 (power).
HS
A
A
M m l L
h H
HS
`/1
6
2
3 s
4
MD A 5
1
Insert a recordable MD.
A
A
HS HS
h H
S
?/1 (power)
With the arrow
pointing toward
the deck
With the label
side up, and
the shutter on
the righthand
side