Shindaiwa Multipurpose Pole Pruner Attachment 78701 T230 - Manual (Page 19)

19
ADDITIONAL PROBLEMS
Symptom
Possible Cause Remedy
Troubleshooting Guide
Engine idle too high.
Broken clutch spring or worn clutch
spring boss.
Warped or damaged attachment.
Loose gearcase.
Chain rotates at idle
speed.
Excessive vibration.
Chain will not rotate.
Adjust idle. Check Specifi cations page for correct idle
speed.
Replace spring/shoes as required, check idle speed.
Inspect and replace attachment as
required.
Tighten gearcase securely.
Bent main shaft/worn or damaged bushings.
Shaft not installed in powerhead or gearcase.
Broken shaft.
Damaged gearcase.
Inspect and replace as necessary.
Inspect and reinstall as required.
Consult with an authorized Shindaiwa servicing
dealer.