H: set phantom table – Sony DVS-V3232B/V3232M User Manual

Page 99

5-27

ROUTING SWITCHER SYSTEM (E)

5-2. Setting Items of the Secondary Station

SONY ROUTING SYSTEM SETUP MENU BKS-R3204 V3.10 STATION NUMBER 16

SET PHANTOM TABLE (PHANTOM:DESTINATION

IN001 :OUT001

IN004 :OUT001

SONY007:OUT001

IN008 :OUT002

VTR005 :OUT002

VTR008 :OUT002

IN011 :OUT001

SONY014:OUT001

VTR009 :OUT002

VTR012 :OUT002

VTR015 :OUT002

.......:.......<.......-. .......:.......<.......-. .......:.......<.......-.

0=SONY 1=VTR 2=SUP 3=CB 4=AIR 5=ME 6=PGM 7=CL

8=SL 9=L A=RET B=MIX C=JEEP D=OSC E=L/A F=REN

Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:NAME G:GLOBAL PHANTOM

H : SET PHANTOM TABLE

Purpose

This menu is used to set PHANTOM which switchers
several crosspoints, using the source selection button of the

remote control unit.

Setting Procedure

Call the menu screen of the remote control unit to be set,

using menu item [R], and then select menu item [H].

Select a item using the cursor.

When [Enter] is pressed, the phantom table can be set.
If [Enter] is pressed before setting, the registration

will be deleted.

Input the data to the phantom table. The phantom

function consists of the global phantom function
registered at the primary station, the normal type of

local phantom function registered at each remote
control unit and the destination off set type of local

phantom function.

.....

Setting the Global Phantom Function

Input the phantom name with the type name and the

number. Next, press [G] at destination name position.
Lastly, input the global phantom number (four digits) set at
the primary station.

.....

Setting the Normal Type of Local Phantom
Function

At [J : NAME STYLE (Type

+ Num)] in the

primary station menu item [J], input the type name
(between 0 and F) and the number for the phantom

name, destination name, source name and level
number respectively. (When the remote control unit

button is pressed, crosspoints with the same phan-
tom name will be switched together.)

At [J : NAME STYLE (DESCRIP. NAME)] in the

primary station menu item [J], input the phantom

name and level number in the same way as a). For
the source name and destination name, the Descrip-

tion name and “Type

+ Number” name can be

selected freely.

Each time [Ctrl]

_ [N] are pressed, the Description

name input mode and “Type

+ Number” name input

mode will be switched alternately.

Description name input mode :

Use the alphabet and numerical keys to enter seven

characters from the head of the Description name.

“Type

+ Number” name input mode :

Input in the same way as a).

n
If a Description name has been set for the input/output
number, the display of Description has priority to the

display of “Type

+ Number” even if the “Type + Number”

name is set.

Example of Setting Screen (Normal Type)

.....

Setting the Local Phantom of the Destination
Offset Type

Enter the phantom name, source name and level number in
the same way as the ordinary local phantom.

When [+] is depressed while the cursor is positioned in the
DESTINATION column, the system enters the Replace-

ment Variable “DST

+ n” input mode. Enter the offset

value “n” in this status.

Example of Setting Screen (Destination Offset Type)

SONY ROUTING SYSTEM SETUP MENU BKS-R3216 V1.00 STATION NUMBER 4

SET PHANTOM TABLE (PHANTOM:DESTINATION

SONY001 : OUT001 < IN001 - 10000000 | ....... : ....... < ....... - 00000000

....... : ....... < ....... - 00000000 | ....... : ....... < ....... - 00000000

0=IN 1=OUT 2=SONY 3=VTR 4=SUP 5=CB 6=AIR 7=ME

8=PGM 9=CL A=SL B=L C=RET D=MIX E=JEEP F=OSC

G=L/A H=REM I=CAM J=STDO K=AUX L=COV M=BS N=CS

O=SAT P=CG Q=WETH R=TEST S=HD T=D1- U=D2- V=SEG

Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:Type + Num G:GLOBAL PHANTOM +:DST+

This manual is related to the following products:

BVS-V3232 HDS-V3232 DVS-V1616 RS-422A DVS-A3232 BKS-R3202/R3210/R3220 BVS-A3232 BKS-R1601 DVS-TC3232 DVS-128 DVS-V6464B/V6464M BKS-R3203 DVS-RS1616