Siemens Electrical Lean Switch - Manual (Page 52)

Diagnostics over Industrial Ethernet
Industrial Ethernet
52 A5E00152007-03
Changing the Language Package
When you first started the PST, you were asked to select a specific language. You
can also change the selected language after this first startup.
To change the language, select Settings -> Language.
Here you will find a list with all available languages.
If the language is displayed in gray, the language package is not available in this
PST version.
Changing the Network Adapter Configuration
If there is more than one network adapter installed in your computer, you can
select a specific network adapter.
You can do this in the PST menu Settings -> Network Adapter (see Figure 6-4).
Here you will find all the network interfaces found on your system (restricted,
however, to four). Make sure that you read the information in the "readme" file on
the supplied CD.
Figure 6-4 Configuring the Network Adapter