Siemens Electrical Lean Switch - Manual (Page 43)

Installation and Maintenance
Industrial Ethernet
A5E00152007-03
43
6. Insert the wires of the IE FC TP cable into the contact cover according to the color code.
7. Press down both contact covers to establish contact with the cores.
8. Close and screw down the cover of the TP ports with insulation piercing contacts.
If you do not have an IE FastConnect stripping tool to strip the insulation from the IE
FastConnect cable, you can prepare the cable to the lengths shown in Figure 8.
12 mm
42 mm
Figure 16. Length of Insulation Stripped from the IE FC TP Cable