Siemens Electrical Lean Switch - Manual (Page 13)

Introduction
Industrial Ethernet
A5E00152007-03
13
Properties of the ELS TP40M
Two electrical ports (RJ-45 jacks) 10/100 Mbps (half/full duplex)
TP connector technology (RJ-45 jack
with MDI-X pinning)
Max. cable length 10 m (TP Cord or TP
XP Cord)
In conjunction with IE FC Outlet RJ-45,
a total cable length of a maximum of
100 m is permitted.
Two electrical ports
with insulation-piercing contacts 10/100 Mbps (half/full duplex)
(with MDI-X pinning)
Permitted cable types:
-
IE FC TP standard cable 6XV1840-
2AH10
cable length max. 100 m *
- IE FC TP marine cable 6XV1840-
4AH10
cable length max. 85 m *
- IE FC TP trailing cable 6XV1840-
3AH10
cable length max. 85 m*
*The specified IE FC cable lengths are reduced by 10 m if an IE FC outlet is used.