Sharp FO-775L - Manual (Page 80)

Using TEL Mode
78
Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone
after answering a call on your fax or an extension phone. If you use a
computer fax modem to send documents on the same line, you must
turn this function off in order to prevent your fax from mistakenly
attempting to receive documents from the computer fax modem.
Follow the steps below to change the setting.
1
Press these keys:
The display will show:
4
FAX SIGNAL RX
2
Press 1 to turn on the function, or 2 to
turn it off.
1 or
YES NO
3
Press the STOP key to return to the
date and time display.
FUNCTION
STOP
2
2 in 1 Print
To save paper, you can have the size of your incoming faxes reduced
by 55%. This will allow you to receive, for example, a 2-page
document on one page (note that this may not be possible if the
document pages are longer than your printing paper). To turn on this
function, follow the steps below.
1
Press these keys:
The display will show:
2 IN 1 PRINT
6
FUNCTION
all.book Page 78 Friday, July 14, 2000 11:47 AM