Sharp FO-775L - Manual (Page 39)

Setting Up and Using OpenLCR
37
2. S
e
tting Up
O
penLCR
Registering by phone
To register by phone, follow these steps:
1
Pick up the handset on the fax
machine.
1
2
Press the OpenLCR key and then the
1 key.
3
If the display shows the alternating
messages at right, press the number
keys to enter your fax/phone number,
including the area code (the number
must be 10 digits long). When
finished, press the START/
MEMORY key.
(If the message at right doesn’t
appear, this step is not necessary.)
SET OWN NUMBER
10 DIGITS
3 2 1 4 4 1 1 4 4 2
(Example)
START/MEMORY
OpenLCR
Important!
Be sure that you enter your correct area code
and fax number. If not, your fax may not dial the
correct number to connect to OpenLCR.
all.book Page 37 Friday, July 14, 2000 11:47 AM