Samson 170 - Manual (Page 3)

3
Congratulations on purchasing the Samson Servo Amplifier! Although designed
for easy operation, we suggest you first take some time to go through these
pages so you can fully understand how we’ve implemented a number of unique
features.
The Servo Amplifier is a stereo power amplifier which is optimized for use in
both professional and project recording studio environments as well as for live
performance. This manual covers three models, which differ primarily in terms
of the power they provide: the Servo-550, which delivers 275 watts of power per
channel (into 4 ohms); the Servo-260, which delivers 130 watts of power per
channel (into 4 ohms); and the Servo-170, which delivers 85 watts of power per
channel (into 4 ohms). In addition, the Servo-550 provides a mono bridging
switch and a binding post (banana jack) output connector. All Servo Amplifier
models can be used in a variety of applications, including powering studio
nearfield or performance stage monitors, providing amplification for small and
medium-sized public address systems, driving small and medium bi-amped and
tri-amped speaker systems, as an extension to a home hi-fi system, and as the
main amplifier in installations such as classrooms and corporate conference
rooms.
In these pages, you’ll find a detailed description of the many features of your
Servo Amplifier, as well as a guided tour through its front and rear panels,
step-by-step instructions for its setup and use, reference appendices, and full
specifications. You’ll also find a warranty card enclosed—please don’t forget to
fill it out and mail it in so that you can receive online technical support and so we
can send you updated information about these and other Samson products in
the future.
SPECIAL NOTE: Should your unit ever require servicing, a Return Authorization
number (RA) is necessary. Without this number, the unit will not be accepted.
Please call Samson at 1-800-372-6766 for a Return Authorization number prior
to shipping your unit. Please retain the original packing materials and, if
possible, return the unit in its original carton and packing materials.
Introduction