Specifications, Specifications 16 – Samson 170 User Manual
Page 16
16
Specifications
1. Rated Output Power
@ 5%
@ 1%
At 1 kHz, 4 ohm
Model 550
340 W
300 W
Model 260
150 W
139 W
Model 170
105 W
94 W
At 1 kHz, 8 ohm
Model 550
230 W
215 W
Model 260
95 W
105 W
Model 170
70 W
60 W
2. Total Harmonic Distortion (with 30 kHz LPF, 4 ohm)
Model 550 @ 275 watts
0.07%
Model 260 @ 130 watts
0.20%
Model 170 @ 85 watts
0.10%
3. Signal To Noise Ratio (with 80 kHz LPF, all models)
Channel R
103 dB
Channel L
103 dB
4. Frequency Response (LPF off, all models) 20 Hz - 50 kHz, 0 - 1.5 dB
5. Input Sensitivity (all models)
0 dBu ± 1 dB
to achieve rated power
(Attenuator set to maximum)
6. Crosstalk (at 7 kHz sine wave, all models)
85 dB typical
7. Residual Noise (VR min, all models)
73 dB typical
8. DC Offset Voltage (all models)
0 ± 50 mV
9. Idle LED Indicator Output Sensitivity (all models) More than 2.2 V
10. Damping Factor
Greater than 100
11. Dimensions
Servo-550
19 in (w) x 9.75 (d) x 5.25 (h)
482 mm (w) x 247 (d) x 133 (h)
Servo-260
19 in (w) x 9.50 (d) x 3.50 (h)
482 mm (w) x 241 (d) x 89 (h)
Servo-170
19 in (w) x 9.50 (d) x 3.50 (h)
482 mm (w) x 241 (d) x 89 (h)
12. Weight
Servo-550
28.0 lbs • 12.7 kg
Servo-260
17.0 lbs • 7.7 kg
Servo-170
14.5 lbs • 6.6 kg
NOTE: All specs are taken at less than 1% THD