Samson SERVO 600 User Manual

Servo 600, Am pl if ie r s, Power amplifier

PRO

TYPE:

POWER

AMPLIFIERS

PRODUCT

DESCRIPTION

SERVO 600

POWER AMPLIFIER

SERIES

CATEGORY

SERVO 600

AMPLIFIERS

FRONT PANEL

BACK PANEL

GENERAL DESCRIPTION

The Samson Servo 600 stereo power amplifier has
been designed to provide robust, clean output with
low distortion and wide dynamic range, along with
the dependability demanded by the most professional
audio engineers and installers.
The convenient 2 rack-space design is compact,
and yet there’s plenty of power available, with 2 x
225 Watts at 8Ω, 2 x 300 Watts at 4Ω over the full
frequency spectrum, from 10 Hz to 55 kHz.
For mono applications, a Bridge mode links both
channels of the amplifiers, thus providing even more
single channel power, with a power rating of 600 watts
into an 8 Ohm load.
Input connections are available for both unbalanced RCA
connections and balanced 1/4-inch TRS connections.
For the outputs, the Servo 600 amplifier provides
standard 5-way binding posts and 1/4” phone jacks.
Front-panel controls and displays include a power
switch with LED indicator, as well as independent left
and right channel input level controls. To help you set
the correct operating levels, the Servo 600 amplifier
includes front panel Signal, Peak and Protection LED
indicators. There's also a ten-segment VU meter to
help you set a good operating level.
Like all serious power amplifiers, the Servo 600’s internal
electronics are based around a serious power-core,
with an over-sized toroidal transformer and large
extruded heat sink. To keep the Servo 600 amplifier

running cool, the design employs twin internal wind tunnels
with forced-air cooling via two temperature-sensitive, variable
speed fans, which greatly reduce the chance of thermal and
overheating problems. Multi-stage protection for power-
up, over-heating, over-current, short circuit, low output
impedance and DC voltage, assures high reliability under the
most demanding situations.
The Servo 600 amp is road tough with its all steel chassis and
19-inch rack mount design. The Servo 600 amplifier is ready
for a life on the road, or to make its home in a fixed installation.
Optimized for live sound venues, houses of worship, commercial
installations, and for driving small and medium-sized live PA
systems, the Servo Series amplifiers will deliver reliable power
from gig-to-gig, venue-to-venue and day-to-night.

FEATURES

Power to spare - 2 x 225 Watts at 8Ω, 2 x 300 Watts at 4Ω

For mono applications, a Bridge mode links both channels

of the amplifiers, thus providing even more power, with a
power rating of 600 watts driving an 8 Ohm load.

Clean, crisp sound - Impressive audio specifications such

as 0.04% THD, dynamic range of 105 dB, crosstalk of 80
dB, and frequency response of 10 Hz to 55 kHz guarantee
ultra-clean sound quality.

Independent input level controls for each channel allow

precision adjustments.

continues»