Samsung Digimax 301 - Manual (Page 66)

66
You can set the startup sound at power-on.
Start up sound
Setting the Startup Sound
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.BEEP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [OFF] is selected : The startup sound will not be heard.
- If [ON] is selected : The startup sound will be heard.
5. Press the menu button twice and the menu will disappear.
You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
Setting a Startup Image
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [OFF] is selected : The startup image will not
be displayed.
- If [IMAGE1] is selected : The Samsung brand logo
will be displayed.
- If [IMAGE 2] is selected : The startup image you
created in [RESIZE] will be
displayed.
5. Press the menu button twice and the menu will
disappear.
Start up image
MYCAM
S. BEEP
S. IMAGE
BACK: SET:OK
ON
OFF
MYCAM
S. BEEP
S. IMAGE
BACK: SET:OK
OFF
IMAGE1
IMAGE2