Samsung Digimax 301 - Manual (Page 14)

14
Identification of features
Camera status lamp
Color Status Camera Status
Blinking and off Power on processing
When the LCD monitor is turned off
When the USB cable is connected
Blinking slowly Flash recharging
Image processing(compression/decompression)
USB busy
On
Blinking fast
Green
Self-timer lamp (Based on 10-second Self-timer; see p. 28)
Color Status Camera Status
- For the first seven seconds, the LED blinks at 1second intervals.
- For the final three seconds, the LED blinks quickly at 0.5-second intervals.
Blinking once time When the camera’s power is on / when the shutter button is released.
Red
Blinking
Beep
Beep sound Camera condition
Error beep (long beep twice and
short beep twice)
Normal beep (a short beep)
When an error occurs
Rotating the mode dial/
pressing the camera buttons
Power beep When the camera power is turned on/off.
Self-timer beep Beeps simultaneously with the Self-timer lamp blinking.
- To hear the beep sound, you have to set the beep sound to on in the setup mode menu.
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
We recommend using batteries for a digital camera.(Within a year from the date of
manufacture) The batteries are listed below.
Non rechargeable batteries : AA type – Alkaline, Ni-Mn, Ni-Zn, Lithium
CR-V3 type – Lithium
Rechargeable batteries : AA type – Ni-MH, Ni-Cd (over 1000mA)
CR-V3 type – Digimax Battery I-Pack(SBP-1103)
Battery pack – Digimax Battery Pack(SBP-3603)
Connecting to a Power Source