Samsung Digimax 301 - Manual (Page 25)

25
WIDE / TELE button
TELE Zoom
Digital zoom TELE : Pressing the zoom button T activates the digital zoom software.
Releasing zoom button T stops the digital zooming at the required
setting. Once the maximum digital zoom (3X) is achieved, pressing the
zoom button T will have no effect. You can check the digital zoom rate
with the [X1.2 ~ X 3.0] numerical mark next to the zoom bar.
[ WIDE zoom ] [ Digital zoom 2.0X ] [ Digital zoom 3.0X ]
Pressing the
TELE button Pressing the
TELE button
WIDE Zoom
Digital zoom WIDE : Pressing the zoom button W will reduce the digital zooming in steps.
Releasing zoom button W stops digital zooming.
[ Digital zoom 3.0X ] [ Digital zoom 2.0X ] [ WIDE zoom ]
Pressing the
WIDE button
Pressing the
WIDE button
To use the digital zoom the LCD monitor has to be turned on.
Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
The digital zoom cannot be used in movie clip shots.
You may notice a decrease in image quality when using the digital zoom.
INFORMATION