Siemens A65 - Manual (Page 23)

©
Sieme
ns
AG
2003, L:\Mobil\R65\
A65_
Puma_v2\am\P
uma_Main.fm
Setup 22
VAR Langua
ge: a
m
; VAR issue
date: 041104
left page (22) of A65_PUMA am, A31008-H5810-A40-1-4A19 (11.11.2004, 16:23)
Call setup
§Menu§
¢
m
¢
Call setup
¢
Select a function
Hide ID
b
When switched on, the display of the call-
ing party shows your phone number (de-
pendent on service provider).
Call waiting
b
If you are registered for this service, you
can check whether it is set and you can
activate/deactivate it with Call waiting .
Call Forward
You can set the conditions for which calls
are diverted to your mailbox or other
numbers.
Set up call divert (example):
• All calls
All calls are diverted.
n
is shown in the
top line of the display in standby mode.
• Unanswered
Includes
Unanswered , Not reachable ,
No reply , Busy .
§Select§
¢
Set
¢
J
(Enter the phone
number, to which the call should be
diverted)
¢
§OK§
After a short pause, the setting is con-
firmed by the network.
Other divert options:
Not reachable ,
No reply , Busy
• Status check
After a short pause the current informa-
tion is shown.
p
Condition set.
o
Not set.
s
Display if status is unknown
(e. g. with a new SIM card).
• Clear all
All set diversions are cleared.
Any to answer
Incoming calls can be accepted by press-
ing any key
(except for
B
).
Minute beep
During the call, you will hear a beep after
each minute as a reminder of the time
elapsed. The recipient does not hear this
beep.