Siemens A65 - Manual (Page 12)

©
Siem
ens AG
2003, L
:\Mobi
l\R65
\A65
_Puma_v
2\a
m
\Puma_Main.f
m
11 Making a phone call
VAR Langua
ge: a
m
; VAR issue
date: 041104
left page (11) of A65_PUMA am, A31008-H5810-A40-1-4A19 (11.11.2004, 16:23)
Change phonecode
You define the phone code (4 to 8 digits)
when calling up a phone-code protected
function for the first time. It is then valid
for all phone-code protected functions.
Following the third unsuccessful attempt,
access to the phone code and the func-
tions that use it is denied. In such an in-
stance contact Siemens Service (p. 30).
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN), provided by your serv-
ice provider with the SIM card, according
to instructions. If the PUK (MASTER PIN)
has been lost, please contact your service
provider.
Preventing accidental activation
Even if PIN entry is deactivated (p. 10)
confirmation is required to switch on
phone.
This prevents accidental activation of the
phone, e.g. when you are carrying it in
a bag or when you are travelling in an
aircraft.
After long press of the On/Off/End key
B
to switch on the phone or abort the
operation with §Cancel§ .
Making a phone call
Dialing with number keys
The phone must be switched on (standby
mode). Dial number (always with area
code, if necessary with international dial-
ing code). To dial International dialing
codes press and hold
0
until a "+"-is dis-
played. Press §+List§ and select country.
Short press §Clear§ to clear the last digit, a
long press clears the entire phone
number. To dial press the
A
key.
End call
Press the End key
B
briefly. Press this
key even if the person on the other end of
the line has hung up first.
Set volume
Use the control key
E
to start adjusting
the volume during conversation. Set vol-
ume with
G
and confirm with §OK§ .
If a Car Kit is used, its volume setting will
not affect the usual setting on the phone.
Redial previous numbers
For redialing previously dialed numbers
press the Call key
A
once, pick out the
required phone number from the list
with
G
, then press
A
again.
If number busy
Press §Auto dial§ for automatically dialing
the phone number ten times at increas-
ing time intervalls or press §Call back§ (
L
)
for phone ringing when the busy number
is free. Press §Prompt§ and a beep will re-
mind you to redial the dispayed phone
number after 15 minutes.
Accept call
The phone must be switched on (standby
mode). An incoming call will interrupt
any other use of the phone. Press §Answer§
or
A
.
Please make sure you have accepted the call
before holding the phone to your ear. This will
prevent a loud ring tone from damaging your
hearing!