Star Micronics LC-1021 - Manual (Page 67)

Checking system software settings in MS-DOS 61
Fanfold (with push tractor feeder)
Paper width:
4
″
to 10.0
″
/ 101.6 to 254mm
Paper thickness: 0.00276
″
to 0.00433
″
/ 0.07 to 0.11 mm (one-ply)
0.01378
″
/ 0.35 mm maximum (total thickness of multi-
ply paper, non-carbon)
Paper weight: 14 to 22 lbs. / 52 to 82 g/m
2
/ 45 to 70 kg (one-ply)
11 to 14 lbs. / 40 to 52 g/m
2
/ 34 to 45 kg (multi-ply)
Copies: Original + 1 or 2 (Normal Mode)
Original + 3 or 4 (Multi-Part Mode)
* Multi-Part Mode is recommended when using
optional pull tractor unit.
Fanfold (with optional pull tractor feeder)
Paper width:
4
″
to 10.0
″
/ 101.6 to 254mm
Paper thickness: 0.00276
″
to 0.00433
″
/ 0.07 to 0.11 mm (one-ply)
0.01378
″
/ 0.35 mm maximum (total thickness of multi-
ply paper, non-carbon)
Paper weight: 14 to 22 lbs. / 52 to 82 g/m
2
/ 45 to 70 kg (one-ply)
11 to 14 lbs. / 40 to 52 g/m
2
/ 34 to 45 kg (multi-ply)
Copies: Original + 1 or 2 (Normal Mode)
Original + 3 or 4 (Multi-Part Mode)
Labels
Backing sheet: 4
.
5
″
to 10.0
″
/ 114 to 254mm
Thickness
Backing sheet: 0.00276
″
to 0.00354
″
/ 0.07 to 0.09mm
Total: 0.0075
″
/ 0.19mm max.
Emulation Standard Mode: EPSON ESC/P (9-pin)
IBM Mode: Proprinter III
Interface Standard: Centronics parallel
Option: RS-232C serial
Ribbon Type On-carriage, dedicated
Monochrome (Y9WH), Black only
Ribbon Life 2.5 million characters (Draft 10 cpi)
Dimensions and Weight Width: 17.6
″
/ 448mm
Depth: 13.9
″
/ 355 mm
Height: 7.3
″
/ 186 mm
Weight: 16.1 lbs. / 7.3 kg
Power Supply 120V AC
+
10%/–17%, 230V AC +14%/–13%; 50/60Hz
(depending on country of purchase)
Power Consumption 11W during standby / 50W during ASCII draft printing
Options PT-10HA Pull Tractor Unit
SF-10HA Single-Bin Automatic Sheet Feeder
IS-8H192 Serial Interface Unit
SPC-8K Serial-To-Parallel Converter