Star Micronics LC-1021 - Manual (Page 35)

Selecting a bank 29
Selecting a bank
❏
While in the EDS Mode, use the control panel’s BANK button to select a
bank. When the BANK indicator flashes it indicates the current bank
selected.
Selecting a switch
❏
While in the EDS Mode, use the control panel’s SWITCH button to select a
bank switch. When the SW indicator flashes it indicates the current switch
selected.
Changing a switch setting
❏
After selecting a bank and switch, press the control panel’s ON/OFF button
to turn the switch on and off. The current setting of the switch is indicated
by the
ON LINE indicator: the indicator is lit when the switch is on, and is
not lit when the switch is off.
Lit Indicator Selected Bank
A 1 A
B 2 B
C 3 C
D 4 D
E 5 E
F 6 F
Lit Indicator Selected Switch
A 1 1
B 2 2
C 3 3
D 4 4
E 5 5
F 6 6