Samsung HT-DS660 - Manual (Page 15)

Connecting the Video Out to TV
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signal. See page 15 to select Progressive Scan.
* Depending on your TV, Component Video input jacks may be marked as DVD Video input.
Note
14
CONNECTIONS
1p~40p(DS660)-SECA GB 11/10/04 1:26 PM Page 17