SMC Networks 1000 - Manual (Page 17)

A
BOUT THE
T
IGER
S
WITCH
1000
1-3
Status LEDs
The LEDs, which are located on the front panel for easy viewing,
are shown below and described in the following table.
Figure 1-2. Port and System LEDs
Port and System Status LEDs
LED Condition Status
Power On Green Switch is receiving power.
Off Power off or failure.
RPU On Green Redundant power unit is attached and
is operating in a load-sharing mode.
Off Power off or failure.
Diag. Flashing Green System self-diagnostic test in progress.
On Green System self-diagnostic test successfully
completed.
On Amber System self-diagnostic test has failed.