Sinclair Super Stripper User Manual
Page 2
2
1.0 Technical data/technical description
Power
supply
110-120V
AC
Power
consumption
2200W,
20A
with
current
limitor
Number
of
strokes
5000
strokes/min
Sound
pressure
level
93
dB(A)
Sound
energy
level
106
dB(A)
Hand/Arm-Vibration
6
m/s2
Weight
220
lbs
Comes
with:
Super
® Stripper, 2 blades, ear & eye
protection
and
tool
kit.
2.0 Safety
The Sinclair Super
® Stripper is state of the art designed and meets all standard safety
requirements.
3.0 Safety Instructions
Disconnect the power supply before any maintenance is carried out.
Use only recommended blades and make sure the blade is sharp before starting.
Maintenance should be undertaken only by qualified personnel. Use only genuine
Sinclair parts.
Transport
Always remove the blade before transporting the machine.
CAUTION!!!
Always wear ear and eye protectors! CAUTION!!!
Using this machine without ear and eye protectors may jeopardize or harm your health.
It may harm especially your ears and increase the risk of an accident.
* PLEASE READ DETAILED SAFETY INSTRUCTIONS ON COLORED
SHEET BEFORE USING MACHINE!
3.1 Introduction
This operating manual should be used to receive the maximum benefit from
your
Super
® Stripper. Following these instructions will both extend the life of
your machine and reduce repair costs.
Please make sure any user of the machine is familiar with these instructions
before work begins.