beautypg.com

Channel settings – Sony KDS-Z60XBR5 User Manual

Page 44

background image

44

Speakers

TV Speakers

Select to use the TV speakers for audio.

Audio System

Select this option if you wish to use an external audio system for the
TV sound. By selecting this option you are disabling the TV speakers.

Audio Out
Easy control of volume
adjustment

Fixed

Select to fix the audio output and allow you to adjust the volume with
your audio system’s remote control. (The TV’s remote control’s VOL
and MUTING buttons have no effect on Audio Out.)

Variable

Select to control the Audio Out’s volume and muting with your TV’s
remote control.

Woofer Level

Increases or decreases the low frequency sounds.

~

Alternate Audio is available only for digital programs. If the program you are watching is also available in other

languages from the audio tracks, and if that language is what you have selected in the Language setting, your TV
will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing OPTIONS on the remote control when alternate audio stream is available from
the broadcaster.

Channel Settings

Cable

On

For receiving cable channels via cable TV provider.

Off

For using an antenna.

~

• You should run Auto Program after changing the Cable setting.

Auto Program

Automatically sets up the channel list on the TV for all receivable channels. Channel
scanning will be based on On/Off of Cable setting.

1

Select Auto Program.

2

Select OK to start Auto Program. When Auto Program is completed, the screen
will display the number of channels found.

3

Press RETURN to exit Auto Program.

~

• Running Auto Program will clear Favorites list.
• If you run Auto Program again, previously scanned channels will be overwritten with

the newly scanned channels.

Add Digital Channels

Select to add digital channels. Be sure to have the Cable option selected appropriately for
the signal source. (Useful for antenna installation)

Show/Hide Channels

Allows you to show or hide channels when you surf with the CH +/– button or in the TV
channel list on the XMB

.

1

Press

V/v to scroll through the channels until you highlight the channel to show or

hide.

2

Press

to select Shown or Hidden.

To show or hide more channels, repeat steps 1-2.

~

Hidden channels can be accessed by entering the channel number with 0-9 buttons on

the remote control.