Sony SAT-HD200 - Manual (Page 93)

92
8-18. Testing the System
Checks the integrity of the DIRECTV ® High-Definition Receiver. If any problems are detected, a short
message will be displayed.
To test DIRECTV HD Receiver :
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down using “ E ” on the remote control.
3. Select the System menu by pressing “ ”.
4. System Test will be automatically highlighted.
5. Move the highlight to the right with “ G ”.
6. Press “ ” to activate the system test.
It will run automatically from Signal Strength to Phone Connection and if there is any problem in your
system, the pop-up box will be displayed.
The highlight will return to the previous level after the process is finished.
7. Press the Exit button on the remote control to return to TV viewing.