Sony SAT-HD200 - Manual (Page 75)

8-11. Setting the Audio
Digital Output
If you are using an external audio system that supports Dolby Digital, select Dolby Digital audio
mode. If you are using an external audio system that has a PCM only decoder, select PCM
(Digital). If you are not using an external audio system, select OFF.
An external Digital Output other than Dolby Digital and PCM may create a high pitched
noise and cause damage.
To set the digital audio mode:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down using “ E ” on the remote control.
3. Select the Audio menu by pressing “ ”.
4. Digital Output will be automatically highlighted.
5. Move the highlight to the right with “ G ”.
6. Select one of the three options and press “ ” to return to the previous level.
7. Press the Exit button on the remote control to return to TV viewing.
74