2 install the software into your computers – SMC Networks SMC7004BR User Manual

Page 12

-11-

Request timed out.

there has been an error in your installation procedure. Please go through the following

checklist to ensure proper installation:

1. Is the Ethernet cable correctly connected between the SMC7004BR and your

computer?

Tip: The LAN LED of this product and the link LED of the network card on your

computer must be lit.

2. Is the TCP/IP environment of your computer properly configured?

Tip: If the IP address of this product is 192.168.123.254, the IP address of your

computer must be 192.168.123.X and default gateway must be 192.168.123.254.

3.2 Install the Software into Your Computers

Skip this section if you do not want to use the print server function of this product.

Step 1: Insert the installation CD into your computer’s CD-ROM drive. The following

window will be shown automatically. If it is not, please run “install.exe” on the

CD-ROM.