Sony DAV-HDX589W - Manual (Page 78)

78 US
– If “RF CHANGE” is set to “OFF,” transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
(Only when using the EZW-RT10A
wireless transceiver.)
1
Press SYSTEM MENU.
2
Press X/x repeatedly until “RF
POWER” appears in the front panel
display, then press
or c.
3
Press X/x to select the desired setting.
• “HIGH”: Normally select this.
• “LOW”: The RF output power is
decreased.
4
Press .
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
Changing the RF output power