Sony KP 53HS10 - Manual (Page 45)

41
D:\JN\KP-53HS10\KP53HS10GB\407416311KP53HS10USA\02US-KP53HS10USA\09CTV.fm masterpage:Right
Adjust
ing Yo
ur
SE
T UP (
m
e
nus)
Model name1[KP-53HS10] Model name2[KP-61HS10]
[4-074-163-11 (1)]
Some programs are
broadcast with Caption
Vision.
To display Caption Vision,
select
[[[[CCCCCCCC]]]] 1 , [[[[CCCCCCCC]]]] 2 , [[[[CCCCCCCC]]]]
3 , [[[[CCCCCCCC]]]] 4 , TEXT1 ,
TEXT2 , TEXT3 or TEXT4 from the menu. Then
press the [CC] button until Caption Vision is
displayed.
[[[[CCCCCCCC]]]] 1 , [[[[CCCCCCCC]]]] 2 , [[[[CCCCCCCC]]]] 3 or [[[[CCCCCCCC]]]] 4 displays a printed
version of the dialogue or sound effects of a
program. (The mode should be set to
[[[[CCCCCCCC]]]] 1 for
most programs.) TEXT1 , TEXT2 , TEXT3 or
TEXT4 displays network/station information
presented using either half or the whole screen.
Notes:
• Poor reception of TV programs can cause errors in
Caption Vision and XDS.
Captions may appear with a white box or other
errors instead of the intended text.
• XDS, Caption Vision, and the status display cannot
be used at the same time.
You can select the desired
output signal from the
SELECT OUT jacks at the
rear of the projection TV.
MONITOR:
Select to edit tapes while monitoring. SELECT
OUT outputs the picture displayed on the screen.
VIDEO1–VIDEO4:
Select to edit tapes while viewing an input image
different from that being recorded. SELECT OUT
outputs the signal input to the projection TV
regardless of the displayed picture on the screen.
TV OUT:
Select if you connect an AV receiver to VIDEO 1
IN. SELECT OUT outputs the signal that the TV is
tuned to, regardless of the displayed picture. (see
“Connecting an AV Receiver” on page 19 for
connection)
If you select TV OUT , the following pop-up menu
appears.
Select YES only if you
have connected an AV
receiver, with no other
equipment, to your
projection TV. You can
always select the signal
from the receiver by
pressing TV/VIDEO once.
Select NO if you have connected multiple
components to your projection TV. You can select
an input (VIDEO1 – VIDEO5) with the TV/
VIDEO button.
Note:
• The SELECT OUT signal is only available when
the projection TV is on.
Select from available languages ( ENGLISH ,
ESPAÑOL or FRANÇAIS ) to display all menus
in your language of choice.
CAPTION VISION
— Television closed caption display
DTV INPUT: R.G.B
ASPECT RATIO: 4:3
FREEZE MODE:NORMAL
SELECT OUT:MONITOR
LANGUAGE: ENGLISH
Move Select Exit MENU
SET UP
PARENTAL CONTROL
CAPTION VISION
VIDEO LABEL
DIRECT PLAY
TEXT1
TEXT2
TEXT3
TEXT4
CC1
CC2
CC3
CC4
SELECT OUT
— Output signal selection from SELECT
OUT
Note:
• SELECT OUT setting is not available for the
inputs from VIDEO 5 (DTV) IN.
DTV INPUT: R.G.B
FREEZE MODE:NORNAL
LANGUAGE: ENGLISH
TV OUT
ASPECT RATIO: 4:3
Move Select Exit MENU
SET UP
PARENTAL CONTROL
CAPTION VISION
VIDEO LABEL
DIRECT PLAY
CC1
VIDEO1
VIDEO2
VIDEO3
VIDEO4
SELECT OUT: MONITOR
TV OUT
LANGUAGE
— User’s preferred language
DTV INPUT: R.G.B
DTV ASPECT: 4:3
FREEZE MODE:
Move Select Exit MENU
SET UP
PARENTAL CONTROL
CAPTION VISION:
LANGUAGE:
SELECT OUT:
VIDEO LABEL
DIRECT PLAY
CC1
VIDEO1
MONITOR
VIDEO2
VIDEO3
VIDEO4
TV OUT
Set up using YES
only VIDEO1 input? NO
(continued)