Sony KP 53HS10 - Manual (Page 42)

38
D:\JN\KP-53HS10\KP53HS10GB\407416311KP53HS10USA\02US-KP53HS10USA\09CTV.fm masterpage:Left
Model name1[KP-53HS10] Model name2[KP-61HS10]
[4-074-163-11 (1)]
1 Move the joystick up or down to select the
desired channel. You can view the channel that
is selected with the CHANNEL SKIP menu in
the center sub screen. You can also use CH +/–
or 0–9 and ENTER buttons.
2 Press .
3 Move the joystick up or down to select YES ,
and press .
The selected channel will be erased.
If you want to re-enter the skipped channel, follow
the steps above and select
NO .
You can add a caption for
up to 32 channels of both
VHF/UHF and AUX
inputs.
With the CHANNEL
CAPTION window open:
1 Press and then move the joystick up or
down to select the desired channel. You can
view the channel that is selected with the
CHANNEL CAPTION menu in the center sub
screen.
2 Press .
3 Move the joystick up or down to display the
first letter or number of the caption and press
to select it.
4 Repeat until up to four digits are selected.
5 Press .
To erase a caption, press RESET.
Select ON if your projection TV is connected to a
cable system.
Select OFF if your projection TV is connected to
an antenna.
AUTO SET UP will automatically set CABLE to
ON .
Select YES to signal the projection TV to
automatically program all receivable TV channels.
When all the receivable channels are stored, the
lowest numbered channel will be displayed.
Select NO to cancel AUTO PROGRAM.
The FAVORITE CHANNEL feature enables easy
access to the eight channels that you preset (or the
last channel that you were watching).
(for details on how to set up this feature, see
“Setting and Selecting FAVORITE CHANNEL”
on page 39)
2-6:
When the cable box is connected to the VHF/UHF
input, you can fix the TV’s input to one of the
channels between 2 and 6. Press DBS/CABLE
(FUNCTION) and then CH +/– to change the
cable box channels.
AUX 2-6:
Use this when a cable box is connected to AUX,
and a cable or antenna is connected to VHF/UHF.
VIDEO 1:
Use this when you have connected external video
equipment (e.g. AV receiver) and you want the
projection TV’s input fixed to it.
OFF:
When you want to switch CHANNEL FIX off.
If the projection TV is in the AUX mode when you
turn CHANNEL FIX off, press ANT to return to
UHF input mode.
TIMER settings are erased when CHANNEL FIX is
set.
Note:
• You cannot change channels with the TV’s tuner
when you set CHANNEL FIX. If you want to use
the TV’s tuner while fixing the TV’s input to
VIDEO 1, use the SET UP menu to set SELECT
OUT to TV OUT. (see “SELECT OUT” on page
41)
CHANNEL CAPTION
— Easy recognition of the channel you are
watching
CHANNEL CAPTION
CAPTION : – – – –
CHANNEL : – – –
Move Select Exit MENU
CABLE
— Cable system setting
AUTO PROGRAM
— Automatic channel presetting
FAVORITE CHANNEL
— User’s favorite channels
CHANNEL FIX
— Locks selection of your projection TV’s
input when used in conjunction with
external equipment such as a cable box, AV
receiver, etc.