SMC Networks 5MC2671W - Manual (Page 68)

56
T
ROUBLESHOOTING
Check the following items before you contact technical support.
1. If mobile users do not have roaming access to the
SMC2671W:
Make sure that all the SMC2671Ws and stations in the ESS
in which the WLAN mobile users can roam are configured to
the same WEP setting, SSID, and authentication algorithm.
2. If the management utility cannot connect to the SMC:
Check that your local IP address settings conform to the
SMC2671W settings.
3. If you forgot your password or your SMC2671W has locked
up, you can reset it to factory defaults by performing the
following steps:
• Use a pin to push in the RELOAD button for 5 seconds.
This button is located on the bottom of the SMC2671W.
• The SMC2671W will begin to load the default settings.
• The SMC2671W will restart with the factory default
settings.