Star Manufacturing LC-4522 - Manual (Page 37)

EDS Mode Settings 34
BANK D
Switch 1: Character Table
Selects IBM-Graphic character table (ON) or Italic character table (OFF).
Switch 2: Character Set
When IBM-Graphics character table is selected, code area from 80H to 9FH are used
as the control code (OFF).
Switch 3: Zero Style
Specifies whether a normal zero (ON) or a slashed zero (OFF) will be used.
Selecting Normal (ON) prints zeros without lines running through them, while
Slashed (OFF) prints zeros with a diagonal slash running through them.
Switches 4,5: Reserved
Switch 6: Print Width
Specifies the printing area whether 13.6 inch (ON) or 8 inch (OFF).
Switch 7: Not Used
BANK D
Switches 1,2,3,4,5,6,7: Reserved