beautypg.com

Entering the multi-part mode, 22 control panel operations – Star Manufacturing LC-4522 User Manual

Page 25

background image

22 Control Panel Operations

Entering the Multi-part Mode

When the printer is in the Multi -part Mode, the print head prints with greater

impact. It should be noted, however, that printing in the Multi-part Mode also

reduces the life of the print head. Because of this, you should use the Multi-part

Mode only for printing on four or five-ply paper. Return to the normal mode for

printing on one to three-ply paper.

Use the following procedure to enter the Multi-part Mode

o Make sure the printer is off-line (

ON LINE

indicator is not lit).

o Press

MULTI-PART

to change the printing force selection.

The following shows the meanings of the indicators that light on the control

panel when you press

MULTI-PART

.

o When you will select

Auto

, the printing force is controlled by the adjust-lever position.

o When you will select

Normal

, the printing force is always normal mode and it’s used

the single-sheet or the multi-part form which is less then 1 original and 2 copies.

o When you will select

Multi

, the printing force is always multi-part mode and it’s used

the multi-play form which is 1 original and 3 or 4 copies.