Sharp UX-A1000 - Manual (Page 98)

Polling (Requesting a Fax Transmission)
96
1
Dial the fax machine you want to poll using one of the following
methods:
•
Pick up the handset (or press ) and dial the full number. Wait for
the fax answerback tone.
•
Pick up the handset (or press ) and press a Rapid Key. Wait for the
fax answerback tone.
•
Press and enter a 2-digit Speed Dial number.
•
Enter the full number using the numeric keys.
2
Press .
•
If you used the handset, replace it when POLLING appears in the display.
Reception will begin.
SPEAKER
SPEAKER
SPEED DIAL
16/POLL
Requesting transmission
Being polled (polling standby)
To let another fax machine poll your machine, press to set the
reception mode to FAX and load the document(s).
Transmission will take place when the other fax machine calls your machine
and activates polling. Automatic reception is possible while your machine is
on polling standby.
RESOLUTION/
RECEPTION MODE
all.book Page 96 Wednesday, November 12, 2003 9:50 AM