Sharp UX-A1000 - Manual (Page 54)

Remote Operations
52
Recording a new outgoing message
1
Press and on the telephone.
2
When you hear a short beep, speak into the telephone to record the new
message.
•
The message can be up to 15 seconds long. After 15 seconds (or earlier if
the machine detects silence after you finish speaking), you will hear a beep,
and the new message will be played back.
4
Turning the Transfer function on or off
To turn Transfer on: Press , , and on the telephone.
To turn Transfer off: Press , , and on the telephone.
9 1
9 2
Changing the transfer telephone number
1
Press , , and on the telephone.
2
After you hear a short beep, enter the new telephone number. When
finished, press .
•
To insert a pause between any two digits of the number, press .
9 0
all.book Page 52 Wednesday, November 12, 2003 9:50 AM